Technical Info:
Form:  fluid
Colour:  clear
Odour:  slight
Density:  1.09 g/cm³ at 20°C

Packaging Options:
- 1 litre plastic bottles
- 5 litre plastic bottles
- 10 litre plastic bottles

Storage:
Resi-Clean will keep for 12 months in original packaging from delivery date if stored between 10°C to 30°C.

Coverage:
Approximately 5-10 m² per 1 litre, dependent upon extent of staining and porosity of the surface.

Ensure adequate ventilation if working in an enclosed space. Apply when surface is dry and frost-free. Do not apply to hot surfaces. Sensitive materials such as rubber, PVC and painted surfaces should be protected, if in doubt make a small test in an inconspicuous area. Do not dilute. Liberally apply an even coat over the area to be treated using a brush. Do not apply using a spray. A minimum of 20 minutes should be allowed for Resiclean to act, longer if required: Solvent based sealants and paints might require 30-60 minutes. Epoxy/resin based sealants and glues might require 1-2 hours. Agitate the wet surface frequently using a scrubbing brush in order to loosen contaminants and enable Resiclean to access freshly exposed surface layers. Do not allow Resiclean to dry out on the surface, re-apply as necessary in order to maintain the surface being treated in a wet condition. For very heavily contaminated surfaces the treatment may be repeated if desired.

To remove residual waste use WEISS Grundreiniger pH neutral detergent and water.

Coverage:
Approximately 5-10 m² per 1 litre, dependent upon extent of staining and porosity of the surface.